Back to Blog

Plumbing

Plumbing Emergency in Houston: What to Do in the First 15 Minutes

Published 2026-11-06

Water spreads fast. A burst pipe or a failed water heater can soak flooring, drywall and cabinets within minutes. What you do before the plumber arrives often decides whether you face a small repair or a major restoration bill. Here is what to do, in order.

1. Stop the water

Find your main water shut-off valve and close it. In many Houston homes it is where the water line enters the house, often near an outdoor hose bib, in the garage, or in a utility area. Turn the handle clockwise until it stops. If it is a lever, turn it so it sits across the pipe.

If you cannot find or turn the house valve, the city water meter box near the street also has a valve. It may need a meter key, which you can buy at most hardware stores. Keep one at home before you ever need it.

For a single fixture, use its own valve first:

  • Toilet: the oval handle on the wall behind the toilet.
  • Sink: the small valves under the sink.
  • Water heater: the cold-water inlet valve on top of the tank.
  • 2. Make it safe

  • Keep away from water near outlets, power strips or appliances. If water is reaching anything electrical and you can safely reach your breaker panel from a dry spot, turn off power to the affected area. If not, stay out and call for help.
  • Electric water heater leaking: turn off its breaker.
  • Gas water heater leaking: turn the gas control to OFF. If you smell gas, leave the house and call your gas company from outside.
  • 3. Drain the lines

    Open a faucet at the lowest point of the house and the tub faucets to relieve pressure and drain water still in the pipes. Flush toilets once to empty the tanks if the leak is in the supply lines.

    4. Limit the damage

  • Move furniture, rugs and electronics out of the wet area.
  • Use towels, buckets and a wet/dry vacuum to remove standing water.
  • Open windows or run fans to start drying. Houston humidity means mold can start within 24 to 48 hours.
  • 5. Document everything

    Take photos and short videos of the leak, the source and the damage before cleanup. Your insurance company will ask for them.

    6. Call a plumber with the right details

    Tell the plumber:

  • What happened: burst pipe, leaking water heater, overflowing toilet, sewage backup.
  • Where: the room, and whether the pipe is in a wall, ceiling, attic or slab.
  • What you already did: for example, "the main water is off."
  • How old the home and water heater are, if you know.
  • Ask for the emergency rate up front, and confirm the plumber is licensed. Texas requires plumbers to be licensed by the state plumbing board.

    Houston-specific risks to watch

  • Freezes. Hard freezes are rare here, but they do happen, and many Houston pipes are not insulated. When a freeze is forecast, insulate exposed pipes and drip faucets.
  • Slab leaks. Houston's expansive clay soil moves with wet and dry seasons. A warm spot on the floor, the sound of running water with everything off, or an unexplained jump in your water bill can mean a leak under the slab.
  • Water heaters in attics. Many homes have them in the attic. Check the drain pan and pan line every year; a failed heater there can damage ceilings.
  • Need a plumber now?

    Houston Service Connect is a free connection platform, not the contractor doing the work. Tell us your ZIP code and what is happening, mark it as an emergency, and we will work to connect you with participating local plumbers. Always confirm licensing, insurance and pricing before you hire.

    Need help now?

    Request help for free and we'll connect you with local Houston professionals.

    Ready to get connected?

    Tell us what you need and we'll help connect you with qualified local professionals.